Allen + Roth L23064-VS36-WO Instrucciones De Montaje página 4

ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED (not included)
Safety
goggles
1. Place the vanity combo in the desired position
taking into account the location of your plumbing.
Make sure the vanity top is flush against the wall.
Adjust the leg levelers so the vanity combo is
level.
2. Clear backsplash of all debris before applying
clear silicon sealant (not included).
Apply a few thin beads of sealant to unpolished
back and bottom edge of the backsplash .
3. Set unpolished bottom edge of backsplash on
the vanity counter top and press gently against
wall and down on the top.
Remove any excess sealant from the wall and the
vanity top.
4. The vanity is ready after drying for 24 hours.
Sealant
4
Level
1
2
Back of backsplash
3
4
24H!