Publicidad
Idiomas disponibles
Idiomas disponibles
EN
6. TECHNICAL SPECIFICATIONS.
TECHNICAL DATA.
VOLTAGE/FREQUENCY.
MAXIMUM ABSORBED POWER.
MAXIMUM EFFECTIVE POWER.
MINIMUM GENERATOR POWER.
OPEN CIRCUIT VOLTAGE.
EQUIPMENT EFFICIENCY (1).
IDLE CONSUMPTION (1).
WELDING REGULATION.
DUTY CLYCLE. (X)
FUNCTION.
Ø MAXIMUM ELECTRODE.
INSULATION CLASS.
DEGREE OF PROTECTION.
DIMENSIONS.
WEIGHT.
(1) Regulation (EU) 2019/1784 of the European Commission, Annex II. Ecodesign
requirements. Effective as of 1/1/2023.
A 60% duty cycle (X) for a 10-minute cycle (UNE EN 60974) corresponds to a 6-minute load (work)
period, followed by a 4-minute idle period.
7. COMMISSIONING.
WELDING CABLES.
Proceed to connect the welding cables, only when the machine is unplugged.
The clamp of the ground cable must be connected to the work piece, ensuring that there is direct
contact with the piece and avoiding varnished surfaces and/or non-metallic materials. The
instructions of the electrode manufacturer regarding the correct polarity must be considered. If
the piece is not connected to ground for electrical safety or due to its size or position, for
instance, ship hulls or metal structures of buildings, a direct connection to ground must be
established. Welding cables should be kept as short as possible. They need to be positioned close
to each other, at or near floor level. It is not recommended to replace the cables included with
the machine with longer ones.
PREPARING FOR THE WELDING.
The ground connection of all metal elements in the installation of the welder and adjacent to it
must be considered. However, the metallic elements connected to the work piece will increase
the operator's risk of receiving an electric shock by simultaneously touching the electrode and
said elements. The operator must be isolated from all connected metallic components.
SCREENS AND SHIELDS.
The selective use of screens and shields of other cables and equipment in the work area can
reduce interference problems. The total protection of the installation can be considered for
specific uses.
VULCANO 162
1~ 230V. – 50/60Hz.
6,6 KVA.
4,9 KW.
8 KVA.
73V.
85,99%
43,88 W/h.
20-160 A.
160 A. – 60%
124 A. – 100%
MMA / TIG
4,0mm.
H
IP21S
340x145x230mm.
6,2 Kg.
33
VULCANO 202
8,9 KVA.
6,4 KW.
11 KVA.
87,96%
44,89 W/h.
20-200 A.
200 A. – 60%
155 A. – 100%
5,0mm.
Publicidad
