Parkside PAT 4 D5 Traduccion Del Manual De Instrucciones Originale página 37

Wear hearing protection!
Vibration values determined in accordance with
EN 60745:
Vibration emission value a = 2.537 m/s
2
h
Uncertainty K = 1,5 m/s
2
Note: The vibration level specified in these instructions has been
measured in accordance with a standardized measuring procedure
specified in EN60745 and can be use for equipment comparisons.
The specified vibration emission value can also be used to make an
initial exposure estimate.
The vibration level varies in accordance with the use of the power tool
and may be higher than the value specified in these instructions in some
cases. Regular use of the electric tool in such a way may cause the us-
ers to underestimate the vibration. Try to keep the vibration loads as
low as possible. Measures to reduce the vibration load are, e.g. wear-
ing gloves and limiting the working time. All states of operation much
be taken into account (e.g. time when the power tool is switched off
and time where the power tool is switched on but running without load).
General power tools safety warnings
Read all safety directions and instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or
serious injury.
GB/IE 37