Publicidad
Idiomas disponibles
Idiomas disponibles
STOP MODE
Figure 5
Press "STOP" key with buzzer sound 0.5s, enter into Stop mode. All the LCD windows no display, but after 0.5s
LCD will display TIME, DIST, CAL (display KM or ML according to the setting). After 7s with buzzer sound
0.25s, LCD display MAX ICON, WATTS, SPEED, PULSE also after keep shows 7s with buzzer sound 0.25s,
LCD display AVE, WATTS, SPEED, PACE, after keep shows 7s without display any data at the moment,
then re-show the data two times and enter into stand by mode. (Figure 5)
QUICK START
Figure 6
A. In standby mode, with single RPM>20 input, quick press "START", buzzer sound 0.5s,
then TIME, CALORIES, DISTANCE, WATTS, SPEED and PACE shining in sequence, the
value will count up according to the operation.
B. "PULSE" window is lighten, if any heart single input the "PULSE" window is flashing
with current value, if no heart single input LCD display "P".
C. If without any single input in 5min, the buzzer rings for 0.5s and computer will back
to standby mode.
D. If did not complete the setting in 30 seconds, the buzzer sounded for 0.5 seconds
and back to standby mode.
E. Press the "START" key once, enter into the break mode and press "START" to continue
running.
F. Press the "STOP" key to sound the buzzer for 0.5 seconds and enter into the stop
mode.
G. If the result of movement is displayed, press "STOP" key to leave and return to stand
by mode.
H. When adjust the resistance handle, it will display the LOAD resistance for each
segment in WATT window.
11
Publicidad
