Functional Description - Milwaukee 2150-20 Manual Del Operador

FUNCTIONAL DESCRIPTION

1
2
1. Handle
2. Control panel
3. Battery power
indicator
4. Brightness indicator
5. AC power indicator
6. Power button
7. Decrease
brightness button
3 4
8
6 7
10
11
12
13
14
15
8. Increase brightness
button
9. Area selector
10. ONE-KEY™ indicator
11. Battery door locks
12. Battery door
13. Screw holes
14. AC input
15. AC output
5
9
US
C
WARNING
cific charging instructions, read the operator's
manual supplied with your charger and battery.
Inserting/Removing the Batteries
Insert each battery pack by sliding battery pack(s)
into the body of the tool. Insert each battery pack
until the battery latches lock.
To remove the battery pack(s), press in both battery
latches and slide each battery pack off of the tool.
Inserting/Removing Extension Cords
When not using the AC option, make sure the AC
doors are closed completely.
To operate the light on AC Power, open the
and plug in a suitable extension cord into the light.
When running the light on AC Power, an extension
cord can be run from the light. Open the
plug in a suitable extension cord.
NOTE: Do not exceed 10.5A of output. Reduce AC
Output Amps by 1.5A per additional light added in
sequence.
To learn more about the ONE-KEY™ functionality for
this tool, please refer to the quick reference included with
this product or go to milwaukeetool.com/One-Key. To
download the ONE-KEY™ app, visit the App Store or
Google Play from your smart device.
Solid Blue
Blinking Blue Tool is actively communicating with
Blinking Red Tool is in security lockout and can
.
4
SYMBOLOGY
Volts
Direct Current
Alternating Current
Amps
Hertz
Do Not Step
Do not stare at the
CAUTION
operating light source
UL Listing for Canada and U.S.
ASSEMBLY
Recharge only with the charger
specified for the battery. For spe-
ONE-KEY™
ONE-KEY™ Indicator
Wireless mode is active and ready
to be configured via the ONE-KEY™
app.
the ONE-KEY™ app.
be unlocked by the owner via the
ONE-KEY™ app.
door
door and