ASBER TECH Serie Manual De Instrucciones, Uso Y Mantenimiento página 53

asberprofessional.com
Machine stops during op‐
eration.
Machine stops and fills with
water when it is washing.
The machine does not start
with the wash cycle.
n
asberprofessional.com
52
Traces of salt in tub.
Electrical
overloaded.
Machine protection has
tripped.
Door opens.
Pressure
blocked.
Pressure switch faulty.
Overflow
mounted.
Door is not closed prop‐
erly.
Door micro switch faulty.
NOTE: If a fault occurs and is not listed in the above table, please call
the technical service. The manufacturer reserves the right to modify
the technical characteristics with prior warning.
When filling the salt deposit, take care not to
spill salt in the tub.
installation Call technical service to modify electrical instal‐
lation.
Reset safety device and if it trips again, call tech‐
nical service.
Call the technical service to repair it.
switch pipe
Empty the tub and clean thoroughly.
Call the technical service to replace it.
incorrectly
Mount overflow correctly.
Close the door properly and if it opens alone, call
the technical service.
Call the technical service to replace it.
ENGLISH