About Ipod/Iphone; About Bluetooth; Troubleshooting - Kenwood KDC-BT48DAB Manual De Instrucciones

MORE INFORMATION

About iPod/iPhone

Made for
- iPod touch (1st, 2nd, 3rd, 4th, and 5th generation)
- iPod classic
- iPod nano (3rd, 4th, 5th, 6th, and 7th generation)
- iPhone, iPhone 3G, 3GS, 4, 4S, 5, 5s, 5c
• For the latest compatible list and software versions of
iPhone/iPod, see: www.kenwood.com/cs/ce/ipod
• You cannot operate iPod if "KENWOOD" or " " is displayed
on iPod.
TM
About Aha Radio
• Aha TM is a third-party service, therefore the specifications
are subject to change without prior notice. Accordingly,
compatibility may be impaired or some or all of the services
may become unavailable.
TM
• Some Aha functionality cannot be operated from this
unit.

About Bluetooth

• Depending on the Bluetooth version of the device, some
Bluetooth devices may not be able to connect to this unit.
• This unit may not work with some Bluetooth devices.
• Signal conditions vary, depending on the surroundings.
• For more information about Bluetooth, visit the following
website: www.kenwood.com/cs/ce/

TROUBLESHOOTING

Symptom
Sound cannot be heard.
"PROTECT" appears and no operations
can be done.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the display is
incorrect.
The unit does not work at all.
DAB reception is poor.
"DAB ANT ERR" appears.
• Radio reception is poor.
• Static noise while listening to the radio.
"NA FILE" appears.
"NO DISC" appears.
"TOC ERROR" appears.
"PLEASE EJECT" appears.
Disc cannot be ejected.
"READ ERROR" appears.
"NO DEVICE" appears.
"COPY PRO" appears.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Check to be sure the terminals of the speaker wires are insulated properly, then
reset the unit. If this does not solve the problem, consult your nearest service
center.
Clean the connectors. ( 2)
Reset the unit. ( 3)
Make sure [ON] is selected for [DAB ANT POWER]. ( 4)
Check the DAB antenna. If a passive antenna (without a booster) is used, set
[DAB ANT POWER] to [OFF]. ( 4)
• Connect the antenna firmly.
• Pull the antenna out all the way.
Make sure the disc contains supported audio files. ( 18)
Insert a playable disc into the loading slot.
Make sure the disc is clean and inserted properly.
Reset the unit. If this does not solve the problem, consult your nearest service
center.
Press and hold M to forcibly eject the disc. Be careful not to drop the disc when it
is ejected. If this does not solve the problem, reset the unit. ( 3)
Copy the files and folders onto the USB device again. If this does not solve the
problem, reset the USB device or use another USB device.
Connect a USB device, and change the source to USB again.
A copy-protected file is played.
ENGLISH | 19