Cleaning And Maintenance - Mobicool W38 Instrucciones De Uso

Cleaning and maintenance

Coolers with the additional heating feature
➤ Push the switch on the control panel to HOT or COLD to switch the cooler
on.
✓ The indicators on the control panel show you the operating mode:
Operating display
Red
Green
✓ The cooler starts cooling/heating the interior.
➤ To switch off the cooler, push the switch on the control panel from HOT or
COLD to the OFF position.
6.4 Connecting to the cigarette lighter
I
NOTE
If you connect the cooler to the cigarette lighter, remember that
the ignition must be turned on to supply it with power.
7 Cleaning and maintenance
!
WARNING!
Always disconnect the device from the power supply before you
clean and service it.
A
NOTICE! Risk of damage
 Never clean the cooler under running water or in dish water.
 Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp cloth.
➤ Make sure that the air inlet and outlet vents on the device are free of any
dust and dirt, so that heat can be released and the device is not damaged.
12
Operating mode
Heating
Cooling
Mobicool AC/DC
EN