Publicidad
Idiomas disponibles
Idiomas disponibles
∙ If the unit is not used for an extended period of time, we
recommend keeping the door open.
∙ W e reserve the right to introduce technical modifications.
Familiarisation
1.
Door hinge cover
2.
Door hinge
3.
Double-walled glass door
4.
Power cord
5.
Adjustable feet
6.
Chrome-plated storage racks
7.
Housing
8. Drain channel
9.
Compressor
10. Interior lighting with On/Off switch
11. Temperature control
Before using for the first time
∙ Remove any exterior and interior packaging materials.
∙ Ensure proper disposal of all packaging materials.
∙ Clean the unit according to the instructions given in the
Cleaning and care section.
∙ The unit should only be transported in its vertical
position; do not tilt any more than 30°.
∙ Once the unit has been positioned, wait for about 30
minutes before it is connected to the mains.
∙ If the unit has been tilted more than 30° during transport,
allow it to stand upright for at least 4 hours before it is
connected to the mains.
∙ W hen the unit is first switched on, a slight 'new' smell
may be noticed. However, this will disappear once the
cooling process has begun.
Installation
∙ The appliance should be set up in a well-ventilated, dry
room.
∙ It should be operated in conditions where the relative
humidity is no more than 70 %.
∙ The product data sheet contains details of the ambient
temperature range suitable for this appliance.
∙ Do not place the appliance outdoors.
∙ Ensure that the plug is accessible and can be removed
from the wall socket at any time.
∙ Do not expose the appliance to direct sunlight, and
do not position it next to any heat sources (radiators,
cookers etc). If this cannot be avoided, however,
suitable insulation must be in installed between the heat
source and the unit.
∙ The unit must not be installed inside a cabinet, nor
directly below a hanging cupboard, shelf or similar
object.
∙ Ensure that the door can swing open to an angle of 90°.
∙ If the floor is uneven, the adjustable feet on the unit can
be used to compensate and ensure optimum stability.
11
Publicidad
