Using The Dehumidifier With Climate App; Empty The Water Tank; Filter Cleaning - Princess 01.353120.01.001 Manual De Usuario

Instruction manual

USING THE DEHUMIDIFIER WITH CLIMATE APP

The dehumidifier can be used manually with its built-in controls or you
can use a smart phone to control it. Before you begin, ensure the
Homewizard Climate app is downloaded. The Homewizard Climate
app is available on Android and iOS.
Pair your dehumidifier to HomeWizard Climate app
• Make sure your dehumidifier is powered.
• Open HomeWizard Climate APP.
• Create an account or if you already have a HomeWizard account,
please log in using those details.
• Click "Add new Climate Device" to add a new device.
• Select the device you wanted to connect.
• Follow the instructions on the app to connect the dehumidifier.

EMPTY THE WATER TANK

• When the drainage tank is full, the tank full indicator light will turn
on, the operation will stop automatically and the buzzer will beep
15 times.
• Gently press on the sides of the tank and pull the tank out with
both hands.
10
• Empty the water tank above a sink.
• Do not remove the float from the water tank, otherwise the water
sensor cannot detect the water level, causing the unit to
malfunction.
• If the tank is dirty, use water for cleaning. Do not use gasoline or
other chemicals, because it may damage the water tank and
cause water leakage.
• Press the tank tightly with both hands to put it into place.
• If the water tank is not positioned correctly, the full water sensor
will remain active and the dehumidifier will not work.

FILTER CLEANING

• Take the filter out of the unit.