General Safety - Waeco SinePower MSP 702 Instrucciones De Uso

Safety instructions
2.1

General safety

 During construction of a 230 Vw socket distribution circuit, it is
!
absolutely essential to have a circuit breaker (residual current
circuit breaker) installed and a grounding bridge set by a trained
professional, see chapter "Connect multiple appliances" on
page 48.
 Electronic devices are not toys!
Keep electrical appliances out of reach from children or infirm
persons. Do not let them use the appliances without super-
vision.
 Persons (including children) whose physical, sensory or mental
capabilities or lack of experience and knowledge prevents them
from using the appliance safely should not use this appliance
without initial supervision or instruction by a responsible person.
 Use the device only as intended.
 Do not operate the device in a damp or wet environment.
 Do not operate the device near any flammable materials.
 Do not operate the device in areas that are potentially explosive.
 Maintenance and repair work may only be carried out by quali-
fied personnel who are familiar with the risks involved and the
relevant regulations.
2.2 Safety when installing the device
 Ensure the device is standing firmly.
!
The device must be set up and fastened in such a way that it
cannot tip over or fall down.
 Take the precautions necessary to ensure that children cannot
interfere with operation. Dangerous situations may occur which
cannot be recognised by children!
 Do not expose the device to a heat source (such as direct sun-
light or heating). Avoid additional heating of the device in this
way.
For installation on boats
 If electrical devices are incorrectly installed on boats, corrosion
!
damage might occur. Have the inverter installed by a specialist
(marine) electrician.
36
SinePower
EN