Menu Structure - Tascam DR-10C Manual Del Usuario

Menu structure

Press the MENU button to open the Menu Screen. This list provides an overview of the various menu items.
Menu item Summary
MIC GAIN Mic gain switch LO / MID / HI
MIC BIAS Mic bias switch
LOW CUT Low cut filter
LIMITER Input limiter
Automatic level
AUTO LEVEL
adjustment
Sampling
FS SAMPLE
frequency
Quantization bit
BIT LENGTH
depth
Recording file
FILE TYPE
type
18
TASCAM DR-10C
Setting items
(default value Explanation
underlined)
Use to change the mic input sensitivity.
NOTE
If the
AUTO LEVEL
is changed. When this happens,
Set this to ON when recording with a lavalier mic connected to this unit without a transmitter connected. When set
OFF / ON
to ON, this unit will provide a mic bias of about 2 V.
OFF / ON Turns the mic input low-cut filter on or off. The cutoff frequency is 120 Hz.
This function prevents distortion when signals that are too loud are input suddenly. Turns this function on or off.
Distortion of sounds may occur when signals that are very loud are input even if the LIMITER function is activated.
OFF / ON
In such a case, use the Menu Screen
from the sound source.
When the input sound level is too low or too high, the recording volume will be increased or decreased automat-
OFF / ON
ically to an appropriate level.
44.1kHz / 48kHz Use to set the sampling frequency setting.
16bit / 24bit Use to set the quantization bit depth.
Use to set the recording file type.
MONO: Record mono files.
POLY: Record stereo files (with the same data on both left and right channels).
MONO / POLY
NOTE
If the
DUAL REC MODE
setting is changed to
item on the menu screen is set to
ON
will appear in a pop-up message.
AUTO LVL Cance l
item to lower the mic input sensitivity, or increase the distance
MIC GAIN
item on the menu screen is set to
. When this happens,
POL Y DUAL REC Cance l
, it will be reset to when the
OFF MIC GAIN
, it will be reset to when the
ON OFF
will appear in a pop-up message.
setting
FILE TYPE