Sony MDR-IF630RK Manual De Instrucciones página 6

Continued
2
Connect the supplied AC power
adaptor to the transmitter.
Transmitter
B
AUDIO IN
AC power adaptor
(supplied)
3
If your AC power adaptor is equipped
with a voltage selector, before
connecting the AC power adaptor to an
AC outlet, set it to the operating
voltage in your area with a
screwdriver.
to an AC outlet
If the plug of the AC power adaptor
does not fit in the AC outlet, use the
supplied AC plug adaptor.
4
Connect the AC power adaptor to an
AC outlet.
GB
6
DC IN 9V
R A L
to DC IN
9 V jack
5
If your AC power adaptor is equipped
with an on/off switch, set it to ON.
The power is supplied to the
transmitter.
Notes
• Do not connect to the AUDIO IN A and B jacks at
the same time. If you do so, the audio signals may be
mixed.
• Use only the supplied AC power adaptor. Do not use
any other AC power adaptor.
Polarity of the plug
• Keep the AC power adaptor cord as far away from the
transmitter as possible. If the cord is positioned near
the transmitter, noise may occur.
• When you connect the transmitter directly to a
monaural earphone jack, the audio signal will not be
output through the right channel. In such a case, use
the separately sold PC-236HG plug adaptor.
• If the connected equipment has the AVLS (Automatic
Volume Limiter System) function, be sure to turn the
function off when using the transmitter. Otherwise,
you will have to turn up the volume of the
headphones, and that may cause noise.
On/off switch