Using Its Playlists - Pioneer DEH-P65BT Manual De Instrucciones

Available accessories
Function and operation
REPEAT, RANDOM, SCAN, PAUSE,
COMP/DBE and TITLE INPUT operations are
basically the same as that of the built-in CD
player.
Function name Operation
Refer to Selecting a repeat play
range on page 18.
But the repeat play ranges you can
select are different from that of the
built-in CD player. The repeat play
ranges of the multi-CD player are
REPEAT
as below:
! MCD – Repeat all discs in the
multi-CD player
! TRACK – Repeat just the cur-
rent track
! DISC – Repeat the current disc
Refer to Playing tracks in random
RANDOM
order on page 18.
Refer to Scanning folders and
SCAN
tracks on page 18.
Refer to Pausing disc playback on
PAUSE
page 18.
Refer to Using compression and
BMX on page 18.
Multi-CD player has DBE (dynamic
bass emphasis) function instead
COMP/DBE of BMX.
The settings can be switched as
below:
COMP OFF—COMP 1—COMP 2
—COMP OFF—DBE 1—DBE 2
Refer to Using ITS playlists on this
ITS PLAY
page.
Refer to Using ITS playlists on this
ITS MEMO
page.
Refer to Entering disc titles on
TITLE INPUT
page 19.
Notes
! If you select other discs during repeat play,
the repeat play range changes to MCD.
! If you perform track search or fast forward/re-
verse during TRACK, the repeat play range
changes to DISC.
! After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
! When playing a CD TEXT disc on a CD TEXT
compatible multi-CD player, you cannot
switch to TITLE INPUT. The disc title has al-
ready been recorded on a CD TEXT disc.

Using ITS playlists

ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS programming
You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs (with
the disc titles). (With multi-CD players sold be-
fore the CDX-P1250 and CDX-P650, up to 24
tracks can be stored in the playlist.)
1 Play a CD that you want to program.
Push MULTI-CONTROL up or down to select
the CD.
2 Use MULTI-CONTROL to select
ITS MEMO in the function menu.
3 Select the desired track by pushing
MULTI-CONTROL left or right.
4 Push MULTI-CONTROL up to store the
currently playing track in the playlist.
MEMORY COMPLETE is displayed and the
currently playing selection is added to your
playlist.
5 Press BAND to return to the playback
display.
Note
After data for 100 discs has been stored in mem-
ory, data for a new disc will overwrite the oldest
one.
Section
03
51
En