Usb Operation - Classic Phono TCD-2500 Manual Del Usuario

POWER ON
1) To turn the system 'on', press the POWER button 1 second on the front panel, and set the
volume to a low level. The POWER indicator lights up.
2) Press the function selector buttons (FM/CD/USB/PHONO) to select your desired
function.
3) Start to adjust the volume by rotating the VOLUME control.
4) When you have finished your listening, press and hold the POWER button 2 seconds to
turn off the unit. The POWER indictor goes 'off'.
If nobody presses and holds the POWER button to turn off the unit after stopping playing, the
unit will often POWER off automatically after 10 minutes.

USB OPERATION

1) Press the CD/USB button first and the FUNCTION button second to enter USB mode, the
'---' and 'USB' icon will be shown.
2) Insert a USB device into the USB socket. The player will begin to play the first song of the
USB.
3) MP3 icon will be shown while MP3 is detected.
4) PLAY/PAUSE, DN/F-R/UP/F-F and STOP functions are the same as in CD play mode.
You may press the FUNCTION button on the unit or long press the PLAY/PAUSE button on
the remote control to change the playing mode between CD and USB.
PLAYING IN MP3 MODE (UNDER CD/USB OPERATION)
1) Press PLAY/PAUSE button to start or pause playback of the selected track in the
CD/USB mode.
2) While playing the song, the song number and folder number of your selected track will be
shown on the screen. MP3 icon and '►' icon will be shown.
3) You can stop the playback at any time by pressing the STOP button.
OPERATING INSTRUCTIONS
9