Features - Ryobi JS651L Manual Del Operador

PRODUCT SPECIFICATIONS
Input ......................... 120 Volts, AC Only, 60 Hz, 6.1 Amps
No Load Speed ........................... 600-3200 (SPM) at 120V
Stroke Length ...............................................................1 in.
KNOW YOUR JIG SAW
See Figure 1, page 13.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
BEVELING BASE
The base can be angled from 0 to 45° left or right for a
bevel cut.
BLADE GUARD
The wire blade guard helps protect the operator from ac-
cidental contact with the saw blade.
BLADE SUPPORT ROLLER
The blade-support roller is recessed to ensure accurate
cutting.
BLOWER PORT
The blower port directs debris away from the cut line to
improve line of sight
EDGE GUIDE
Allows you to make straight cuts using the edge of the
workpiece as a guide
CALIFORNIA PROPOSITION 65
WARNING:
This product and some dust created by power sanding, sawing, grinding, drilling, and other construction activities may
contain chemicals, including lead, known to the State of California to cause cancer, birth defects, or other reproductive
harm. Wash hands after handling.
Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products and,
• arsenic and chromium from chemically treated lumber.
Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your
exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially
designed to filter out microscopic particles.

FEATURES

Orbital Settings ................................................................. 4
Net Weight ...............................................................5.5 lbs.
LED LIGHT
The LED light illuminates your work to give you a clear view
of the cut line.
LOCK-ON BUTTON
The lock-on button allows continuous operation.
NO-MAR BASE PLATE
A no-mar base plate has been included with the jig saw. The
plate protects delicate surfaces from being scratched by the
metal jig saw base.
ORBITAL ADJUSTMENT KNOB
The orbital adjustment knob allows you to select four orbital
settings to cut materials of varying thickness and density.
RAPID CHANGE BLADE CLAMP
The rapid change blade clamp does not require the use of a
blade wrench when installing or removing the blade.
NOTE: The jig saw is designed for T-shank blades only.
VACUUM PORT
1-1/4 in. vacuum port conveniently fits a standard hose size
for a cleaner work area.
VARIABLE SPEED CONTROL SELECTOR
The jig saw has a variable speed control selector to allow
operator control of speed and power limits.
7 — English