BFT MOOVI 30 Instrucciones De Uso página 4

ENGLISH
Thank you for buying this product. Our company is sure that you
will be more than satisfied with the performance of the product. This
product is supplied with a "WARNINGS" leaflet and an "INSTRUC-
TION MANUAL". These should both be read carefully as they
provide important information about safety, installation, operation
and maintenance. This product complies with recognised technical
standards and safety regulations. We declare that this product is in
conformity with the following European Directives: 2004/108/CEE,
2006/95/EEC, 98/37/EEC and subsequent amendments.
1) GENERAL OUTLINE
Compact electromechanical barrier suitable for limiting private areas,
parkings, access areas for vehicles only. Available for passageways
from 3 to 5 metres. Adjustable electromechanical limit devices ensur-
ing a correct stop position for the boom. In case of intensive use, a
thermal sensor activates the cooling fan.
The emergency release device for manual manoeuvre is controlled
by a personalised key lock.
The actuator is always supplied for left-hand side fitting.However,
when necessary, the opening direction can be reversed by means
of simple operations.
The CBO mod. foundation base (on request) makes barrier instal-
lation easier.
Appropriate fittings make it easy to install accessories without need-
ing to drill any holes.
WARNING! The barrier must be exclusively used for vehicles to
drive through. Pedestrians must not walk within the opera-
tor manoeuvring area. An appropriate pedestrian passageway
must be provided for.
4
- MOOVI 30-50 - ALPHA BOM Ver. 05
USER'S MANUAL
2) EMERGENCY RELEASE (Fig.1)
The emergency release allows the bar to be manoeuvred manually. It
is activated from the outside of the box by inserting the personalised
key into the lock placed under the bar and rotating it anticlockwise
by 180°.
WARNING! When an actuator without bar needs to be released,
ensure that the balancing spring is not compressed (bar in the
opening position).
3) USE OF AUTOMATION
As automation can be remotely controlled and therefore not within
sight, it is essential to frequently check that all safety devices are
perfectly efficient.
WARNING! In case of any malfunction in the safety devices, take
immediate action and require the assistance of a specialised tech-
nician.
It is recommended to keep children at a safe distance from the
automation field of action.
4) SCRAPPING
Materials must be disposed of in conformity with the current regu-
lations. In case of scrapping, the automation devices do not entail
any particular risks or danger. In case of recovered materials, these
should be sorted out by type (electrical components, copper, alu-
minium, plastic etc.).
Fig. 1