Temperature Setting - GE GeoSpring GEH50DEED Serie Manual Del Propietario E Instalación

Turning on the water heater.
There is no power button for this unit. Once the
water heater is wired and power is supplied, it
will be on. The display will show the current water
temperature setting. Current operating mode for
the water heater is illuminated.
To comply with safety regulations, the controls are
factory preset to 120°F(49°C)and Hybrid IVlode.It
is recommended that the unit be set to Heat Pump
(only) mode to maximize energy savings. Operating
in Hybrid mode provides a balance of energy
savings and hot water use convenience. Reported
energy consumption is based on operating the unit
in Hybrid mode at a temperature setting of 135°F
(57°C),and operation at lower temperature settings
or in Heat Pump (only) mode will provide even
greater energy savings.
oF
oC
DAYS
OHEAT PUMP IoNLYI
OHYBRID
eHI6H DEMAND
• ELECTRIC {FAN O FF)
•VACATION
Hold for
°F/° C
VE_
Hold to Override
PS-Power Sorer
T
LT
Hold to
Reset
6