Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting a computer
You can connect a computer using the HDMI or
VGA jack on the back of your TV.
Warning
Make sure that you turn off and unplug your TV
before installing devices.
Note
When the computer goes into standby mode, your
TV turns off. If your TV does not turn on when you
"wake" your computer, press the POWER button
on your TV or remote control.
To connect a computer using VGA:
1 Plug a VGA cable from your computer into
the VGA jack on the back of your TV.
VGA cable
2 Plug an audio cable from your computer's
audio out jack into the AUDIO jack on the
back of your TV.
3 Plug in and turn on your TV.
4 Press INPUT repeatedly to select the VGA
input source.
To connect a computer using HDMI:
•
Plug an HDMI cable into the HDMI INPUT
jack on the back of your TV and into the
HDMI Out jack on the back of the computer.
Using your TV
Turning your TV on and off
To turn your TV on and off:
1 Make sure that the power cord is connected
to your TV and a power outlet.
2 Press
to turn on your TV. The power
indicator LED turns blue.
3 Press
again to return your TV to standby.
The power indicator LED turns red.
8
VGA
AUDIO
Audio cable
www.insignia-products.com
Insignia NS-LCD15-09 15.6" LCDTV 720P
Selecting the TV signal source
To select the TV signal source:
•
With the TV on, press INPUT on either the
TV or the remote to choose from:
•
TV
•
Composite
•
S-Video
•
Component
•
VGA
•
HDMI
Note
HDMI, the HDMI logo, and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
Setting up the channel list
After you select your TV source, if you selected
antenna or cable you need to set up the channel
list. When you set up your channel list, your TV
searches for all available channels in your area
and stores a list of these channels. When you
press CH – or CH +, your TV skips the channels
that do not have a signal.
Automatically setting up channels
To automatically set up the channel list:
1 Press MENU. The on-screen display menu
opens with Setup highlighted.
2 Press
to enter the sub-menu, then press
or
to highlight Auto Ch Search.
3 Press ENTER or
Note
You can press Exit to stop the search.
Manually adding or deleting channels from the
channel list
After you create a channel list using the Auto Ch
Search option, you can manually add or delete
channels from the channel list.
To add or delete channels:
1 Press MENU. The on-screen display menu
opens with Setup highlighted.
2 Press
to enter the sub-menu, then press
or
to highlight Manual Channel Set. The
Channel Setup Table opens.
3 Press
or
press ENTER to toggle between viewable
and not viewable.
4 Press MENU or EXIT to close the menu.
ENTER
to start the search.
to select a channel, then
Publicidad
