Descargar Imprimir esta página

Makita AC1300 Manual De Instrucciones página 11

Ocultar thumbs Ver también para AC1300:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 31
IMPORTANT INFORMATION
Read and understand all of the operating instructions, safety
precautions and warnings in the Instruction Manual before operating
or maintaining this compressor. Most accidents that result from
compressor operation and maintenance are caused by the failure to
observe basic safety rules or precautions. An accident can often be
avoided by recognizing a potentially hazardous situation before it
occurs, and by observing appropriate safety procedures. Basic safety
precautions are outlined in the "SAFETY" section of this Instruction
Manual nad in the sections which contain the operation and
maintenance instructions. Hazards that must be avoided to prevent
bodily injury or machine damage are identified by WARNINGS on the
compressor and in this Instruction Manual. Never use this compressor
in a manner that has not been specifically recommended by
manufacturer, unless you fi rst confirm that the planned use will be
safe for you and others.
MEANINGS OF SIGNAL WORDS WARNING: indicates a potentially
hazardous situations which, if ignored, could result in serious
personal injury.
CAUTION: indicates a hazardous situations which, if ignored, couls
result moderate personal injury, or could cause machine damage.
NOTE: emphasizes essential information
SAFETY
IMPORTANT SAFETY INSTRUCTIONS FOR USE OF THE
COMPRESSOR.
WARNING:
DEATH OR SERIOUS BODILY INJURY COULD RESULT FROM
IMPROPER OR UNSAFE USE OF COMPRESSOR.TO AVOID
THESE RISKS, FOLLOW THESE BASIC SAFETY INSTRUCTIONS.
READ ALL INSTRUCTIONS
1. NEVER TOUCH MOVING PARTS
Never place your hands, fingers or other body parts near the
compressor's moving parts.
2. NEVER OPERATE WITHOUT ALL GUARDS IN PLACE
Never operate this compressor without all guards or safety features
in place and in proper working order. If maintenance or servicing
requires the removal of a guard or safety features, be sure to
replace the guards or safety feature before resuming operation of
the compressor.
3. ALWAYS WEAR EYE PROTECTION
Always wear safety goggles or equivalent eye protection.
Compressed air must never be aimed at anyone or any part of the
body.
4. PROTECT YOURSELF AGAINST ELECTRIC SHOCK
Prevent body contact with grounded surfaces such as pipes,
radiators, ranges and refrigeration enclosures. Never operate the
compressor in damp or wet locations.
5. DISCONNECT THE COMPRESSOR
Always disconnect the compressor from the power source and
remove the compressed air from the air tank before servicing,
inspecting, maintaining, cleaning, replacing or checking any parts.
6. AVOID UNINTENTIONAL STARTING
Do not carry the compressor while it is connected to its power
source or when the air tank is filled with compressed air. Be sure
the knob of the pressure switch in the "OFF" position before
connecting the compressor to its power source.
7. STORE COMPRESSOR PROPERLY When not in use, the
compressor should be stored in dry place. Keep out of reach of
children. Lock-out the storage area.
8. KEEP WORK AREA CLEAN Cluttered areas invite injurues. Clear
all work areas of unnecessary tools, debris, furniture etc...
9. KEEP CHILDREN AWAY Do not let visitors contact compressor
extension cord. Alla visitors should be kept safely away from work
area.
10. DRESS PROPERLY Do not wear loose clothing or jewerly.They
can be caught in moving parts. Wear protective hair covering to
contain long hair.
11. DON'T ABUSE CORD Never yank it to disconnect from
receptable. Keep cord from heat, oil and sharp edges.
15
12. MAINTAIN COMPRESSOR WITH CARE Follow instructions for
lubricating. Inspect cords periodically and if damaged, have
repaired by authorized service facility. Inspect extension cords
periodically and replace if damaged.
13. OUTDOOR USE EXTENSION CORDS When compressor in used
outdoors, use only extension cords intended for use outdoors and
so marked.
14. STAY ALERT Watch what you are doing. Use common sense.
Do not operate compressor when you are tired.
Compressor should never be used by you if you are under the
influence of alcohol, drugs or medication that makes you drowsy.
15. CHECK DAMAGED PARTS AND AIR LEAK Before further
use of the compressor, a guard or other part is damaged should
be carefully checked to determine that it will operate properly and
perform its intended function. Check for alignment of moving
parts, binding of moving parts, breakage of parts, mounting, air
leak, and any other conditions that may affect its operation. A
guard or other part that is damaged should be properly repaired
or replaced by an authorized service center unless otherwise
indicated elsewhere in this Instruction Manual. Have defective
pressure switches replaced by authorized service center. Do not
use compressor if switch does not turn it on and off.
16. NEVER USE COMPRESSOR FOR APPLICATIONS OTHER
THAN THOSE SPECIFIED.
Never use compressor for applications other than those specified in
the Instruction Manual. Never use compressed air for breathing or
respiration.
17.
HANDLE
COMPRESSOR
compressor according to the instructions provided herein. Never
allow the compressor to be operated by children, individuals
unfamiliar with its operation or unauthorized personnel.
18. KEEP ALL SCREWS, BOLTS AND COVERS TIGHTLY IN
PLACE
Keep all screws, bolts, and plates tightly mounted.
Check their condtions periodically.
19. KEEP MOTOR AIR VENT CLEAN The motor air vent must be
kept clean so that air can freely flow at all times. Check for dust
build-up frequently.
20. OPERATE COMPRESSOR AT THE RATED VOLTAGE
Operate the compressor
nameplates. If using the compressor at a higher voltage than the
rated voltage, it will result in abnormally fast motor revolution and
mey damage the unit and burn out the motor.
21. NEVER USE A COMPRESSOR WHICH IS DEFECTIVE OR
OPERATING ABNORMALLY If the compressor appears to be
operating unusually, making strange noises, or otherwise
appears defective, stop using it immediately and arrange for
repairs by a authorized service center.
22. DO NOT WIPE PLASTIC PARTS WITH SOLVENT Solvents
such as gasoline, thinner, benzine, carbon tetrachloride, and
alcohol may damage and crack plastic parts. Do not wipe them
with such solvents. Wipe plastic parts with a soft cloth lightly
dampened with soapy water and dry thoroughly.
23. USE ONLY GENUINE REPLACEMENT PARTS
Replacement parts not original may void your warranty and can
lead to malfunction and resulting injuries. Genuine parts are
available from your dealer.
24. DO NOT MODIFY THE COMPRESSOR
Do not modify the compressor. Always contact the authorized
service center any repairs. Unauthorized modification may not
only impair the compressor performance but may also result in
accident or injury to repair personnel who do not have the
required knowledge and technical expertise to perform the repair
operations correctly.
25. TURN OFF THE
COMPRESSOR IS NOT USED
When the compressor is not used, turn the knob of the pressure
switch OFF, disconnect it from the power source and open the
drain cock to discharge the compressed air from the air tank.
26. NEVER TOUCH HOT SURFACE
To reduce the risk of burns, do not touch tubes, heads, cylinder
and motors.
27. DO NOT DIRECT AIR STREAM AT BODY
Risk of injury, do not direct air stream at persons or animals.
28. DRAIN TANK
Drain tank daily or after 4 hours of use. Open drain fitting and tilt
compressor to empty accumulated water.
CORRECTLY
Operate
at
voltages specified
PRESSURE SWITCH WHEN THE
GB
the
on their

Publicidad

loading