Descargar Imprimir esta página

Bluetooth Setup (Bluetooth); Sony | Music Center Setup (Sony App); Additional Information; Updating The Firmware - Sony WX-920BT Manual De Instrucciones

Ocultar thumbs Ver también para WX-920BT:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 148

BLUETOOTH Setup (BLUETOOTH)

PAIRING (pairing) (page 8)
Connects up to two BLUETOOTH devices:
[DEVICE 1], [DEVICE 2].
[DEVICE 1] or [DEVICE 2] will be changed to the
paired device name after pairing is complete.
AUDIO DEV (audio device)
Selects the audio device. [*] appears on the
device paired with [DEVICE 1] or the current
A2DP compatible audio device.
RINGTONE (ringtone)
Selects whether this unit or the connected
cellular phone outputs the ringtone: [1] (this
unit), [2] (cellular phone).
AUTO ANSWER (auto answer)
Sets this unit to answer an incoming call
automatically: [OFF], [1] (about 3 seconds), [2]
(about 10 seconds).
AUTO PAIR (auto pairing)
Start BLUETOOTH pairing automatically when
iOS device version 5.0 or later is connected via
USB: [ON], [OFF].
BT SIGNAL (BLUETOOTH signal) (page 8)
Activates/deactivates the BLUETOOTH function.
BT INITIAL (BLUETOOTH initialize)
Initializes all the BLUETOOTH related settings
(pairing information, device information, etc.):
[YES], [NO].
When disposing the unit, initialize all the
settings.
(Available only while the source is off and the
clock is displayed.)
Sony | Music Center Setup
(SONY APP)
AUTO LAUNCH (auto launch)
Activates the "Sony | Music Center" auto launch:
[ON], [OFF].
When [ON] is selected, "Sony | Music Center"
will automatically connect after the BLUETOOTH
connection is complete.
CONNECT (connect)
Establish and terminate "Sony | Music Center"
function (connection).
20
GB

Additional Information

Updating the Firmware

To update the firmware, visit the support site on the
back cover, then follow the online instructions.
Notes
 Using a USB device (not supplied) is required for
updating the firmware. Store the updater in the USB
device, and connect the device to the USB port, then
perform the update operation.
 Updating the firmware takes a few minutes to
complete. During the update, do not turn the ignition
to the OFF position, nor remove the USB device.
Precautions
 Cool off the unit beforehand if your car has been
parked in direct sunlight.
 Do not leave audio devices brought in inside the
car, or it may cause malfunction due to high
temperature in direct sunlight.
 Power antenna (aerial) extends automatically.
Moisture condensation
Should moisture condensation occur inside the
unit, remove the disc and wait for about an hour for
it to dry out; otherwise the unit will not operate
properly.
To maintain high sound quality
Do not splash liquid onto the unit or discs.
Notes on discs
 Do not expose discs to direct sunlight or heat
sources such as hot air ducts, nor leave it in a car
parked in direct sunlight.
 Before playing, wipe the discs
with a cleaning cloth from the
center out. Do not use
solvents such as benzine,
thinner, commercially
available cleaners.
 This unit is designed to play
discs that conform to the
Compact Disc (CD) standard.
DualDiscs and some of the music discs encoded
with copyright protection technologies do not
conform to the Compact Disc (CD) standard,
therefore, these discs may not be playable by this
unit.

Publicidad

loading