Little Journey KFT 509 Manual Del Usuario página 12

Safety
− Do not touch the infrared sensor and
do not blow on it. Dirt on the infrared
sensor could result in inaccurate mea-
surement results.
− Do not use the thermometer if it is
damaged. Using a damaged device
could result in injury, pose serious
risks and result in inaccurate mea-
surements.
− Wait a while before measuring tem-
perature if the thermometer was
stored in an area with a large tempera-
ture difference to the place where you
intend to measure temperature. Both
the thermometer and persons whose
body temperature is being measured
should have been in the same envi-
ronment for at least 30 minutes.
− A greasy forehead could result in
inaccurate measurements. You should
therefore clean your forehead before
taking your temperature. Then wait
approx. 5 – 10 minutes before you per-
form a temperature measurement.
− Repeat the measurements approx.
every 15 minutes if the readings are
unusually low or if you feel they are
inaccurate. If possible, use a conven-
12