Troubleshooting - Shark UV300 Manual Del Usuario

Troubleshooting

WARNING:
To reduce the risk of electric shock, the power cord must be disconnected before
performing maintenance/troubleshooting checks.
PROBLEM
Vacuum will not run.
Vacuum is not
picking up dirt.
Airflow is restricted. No
suction or light suction.
Brush roll does not turn
on.
Vacuum turns off on its
own.
To purchase replacement parts, please visit our website: www.sharkclean.com .
UV300_26_IB_ENG_SPA_111005_1.indd 9
POSSIBLE REASONS & SOLUTIONS
Check to see if the vacuum is plugged in properly.
Check the circuit breaker/fuse.
Check the On/Off button.
Check filters to see if they need cleaning. Follow instructions for rinsing
and drying the filters before re-inserting back into the vacuum. (See
"Maintenance" sections for instructions.)
Dust cup may be full; empty dust cup.
Check hose and hose connections for blockages; clear blockages if required.
If dust cup is empty, and attachment inlets are clear, check for other
blockages. (See "Checking for Blockages" for instructions.)
Press the "Brushroll" button to the "ON" position. The brushroll light near
this button will illuminate green when "ON".
Place your foot on the floor brush and pull the handle back to engage the
brushroll.
If the red light on the power nozzle is illuminated, see the section on
Checking for Blockages.
This vacuum cleaner is equipped with a motor protective thermostat. If for
some reason your vacuum overheats, the thermostat will automatically turn
the unit off. Should this occur, perform the following steps to restart the
motor thermostat:
1. Press the "Power" button to the (Off) position.
2. Unplug the vacuum.
3. Empty the dust cup and clean filters. (See "Maintenance" sections for
instructions.)
4. Check for blockages in hose, accessories and inlet openings.
(See "Checking for Blockages" for instructions.)
5. Allow the unit to cool for a minimum of 45 minutes.
6. Plug in the vacuum.
7. Press the "Power" button to the (On) position to restart the vacuum.
Note: If vacuum still does not start, contact Customer Service at:
1-800-798-7398.
www.sharkclean.com
12-05-23 11:45 AM
English
9