Manual Test - TECshow CUBEX 360 Manual De Usuario

2. Press UP/DOWN to choose, then press ENTER
to enter Shnd.
3. Press UP/DOWN can choose light's three
scene: Sh1, Sh2, Sh3 (can choose any scene mode
to operate )
4. Press Enter to confirm, or press "MENU" to exit.
Master-slave setting
1. Press MENU to enter EDIT interface
2. Press UP/DOWN to choose, then press ENTER
to enter SLnd.
3. Press UP/DOWN to choose Mast/SL1.
4. Press Enter to confirm, or press "MENU" to exit.
DMX Lost Setting
1. Press MENU to enter EDIT interface.
2. Press UP/DOWN to choose, then press ENTER
to enter Lost.
3. Press UP/DOWN can choose light's three scene:
hold, soun, Auto, blac.
(you can choose any scene mode to operate )
4. Press Enter to confirm, or press "MENU" to exit.
Sound sensitivity Setting
(before this setting, please Press MENU into Lost
to select Soun and save, user should be in Sound
Mode first, the different Sound sensitivity can be selected)
1. Press MENU to enter EDIT interface
2. Press UP/DOWN to choose, then press ENTER
to enter Sens.
3. Press Up/Down, Enter to adjust the sound sen-
sitivity from 0%-99%.
4. Press Enter to confirm, or press "MENU" to exit.
Pan angle setting
1. Press MENU to enter EDIT interface.
2. Press UP/DOWN to choose, then press ENTER
to enter Angl.
3 Press<Up/Down> to choose '630'，/'540'
4. Press <Enter> to confirm, or press "MENU" to exit.
Pan reverse setting
1. Press MENU to enter EDIT interface.
2. Press UP/DOWN to choose, then press ENTER
to enter Pint.
3. Press Up/Down to choose 'YES'/'NO'
4. Press Enter to confirm, or press "MENU" to exit.
Tilt reverse setting
1. Press MENU to enter EDIT interface.
2. Press UP/DOWN to choose, then press ENTER
to enter Tint.
3. Press Up/Down to choose 'YES'/'NO'
4. Press Enter to confirm,or press "MENU" to exit.

Manual test

1. Press MENU to enter EDIT interface
2. Press UP/DOWN to choose, then press ENTER
to enter Manu.
3. Press Up/Down, to choose PAN, TIL, TIL2, Red,
Gren, Blue, Whit, Stro, Dim, LED.
Pan
1.Press <Enter> into【PAN，
2. Press <Up/Down> to choose '000~255'
3. Press <Enter> to confirm, or press "MENU" to exit.
TILT
1. Press Enter into TIL.
2. Press Up/Down to choose '000~255'.
3. Press Enter to confirm, or press "MENU" to exit.
TILT2
1. Press Enter intoTIL2.
2. Press Up/Down to choose '000~255'.
3. Press Enter to confirm, or press "MENU" to exit.
Red
1. Press Enter into Red.
2. Press Up/Down to choose '000~255'
3. Press Enter to confirm, or press "MENU" to exit.
Green
P. 9
CUBEX 360
ENGLISH VERSION