Troubleshooting - Oster BCSTFP0000 Manual De Instrucciones

Troubleshooting

Oster Baby Nutrition Center Troubleshooting Chart
®
Situation
oster® baby nutrition center
beeps once and power light
turns on.
in stEaMinG, WaRMinG or
stERiliZinG mode:
You hear 3 beeps and the
steam light turns off or is
blinking.
in stEaMinG, WaRMinG or
stERiliZinG mode:
You hear 1 long beep and the
steam light turns off.
at start of the PRocEssinG
mode, you hear 3 beeps.
While on sterilization mode,
the processing function does
not turn on.
Solution
• Oster baby nutrition center is ready for use. start
®
stEaMinG, WaRMinG, stERiliZinG or PRocEssinG.
•To put the appliance in stand-by mode, or to turn power
off, press the power button. Power light will turn off.
• Steamer, warmer, or sterilizer module is not properly
assembled.
• See "Sterilizing" , "Warming" or "Processing Baby
food and Purees" instructions to properly engage
module with the base, then follow instructions to
operate the module.
•The STEAMING, WARMING or STERILIZING cycle is
complete.
• Water Reservoir is empty; refill with water according
to the recipe, then follow instructions to operate the
module.
• Processor module is not properly assembled.
• See "Processing Baby Food and Purees" instructions
to properly engage module with the base, then follow
instructions to operate the module.
• The Oster® Nutrition Center is designed to operate
a single function at a time. While sterilizing, the pulse
function cannot be used to process food.
Nutrition Center
14
English