Pressure Washer Rinsing - Sears CRAFTSMAN 580.750910 Instrucciones De Uso

Pressure Washer Rinsing
1. Remove black detergent spray tip from nozzle extension.
2. Select and install desired high pressure spray tip
following instructions How to Use Spray Tips.
A WARNING Kickback from spray gun could cause you
to fall resulting in death or serious injury.
Autematic Cool Dewn System (Thermal Relief}
if you run the engine on your pressure washer for
3-5 minutes without pressing the trigger on the spray gun,
circulating water in the pump can reach temperatures above
125°F. The system engages to cool the pump by discharging
the warm water ente the greund.
o
o
o
3.
4.
.
Operate pressure washer from a stable surface.
Be extremely careful if you must use the pressure washer from
a ladder, scaffoHing, or any other similar location.
Firmly grasp spray gun with both hands when using high
pressure spray to avoid injury when spray gun kicks back.
Keep the spray gun a safe distance from the area you
plan to spray.
Apply a high pressure spray to a small area, then check
the surface for damage, if no damage is found, it is okay
to continue cleaning.
Start at the top of the area to be rinsed, working down
with same overlapping strokes as you used for washing
and applying detergent.
15