Sears CRAFTSMAN 580.750910 Instrucciones De Uso página 17

OWNER'SRESPONSIBMLITIES
Follow the hourly or calendar intervals, whichever occurs
first. More frequent service is required when operating in
adverse conditions noted below.
* Changeengine oil
®
®
®
®
®
®
Check!clean water inlet screen 1
Check high pressure hose
Check detergent siphoning hose
Check spray gun and assembly for leaks
Cleandebris
Check engine oil level
Cleanengine air cleaner_
Changeengine oiF
* Check!adjust spark plug
, inspect muffler and spark arrester
* ChecW'adjust i dle speeds
. Cheepadjust valve clearances
* Cleanfuel tank & filted
Cleancombustion
Replace engine air cleaneE
_{iiill ,,S ;_! .... _"
Replace spark plug .......
Checkfuel tubes (Replace if necessary)
1 Clean if clogged. Replace if perforated or torn.
2 Service more often under dirty or dusty conditions,
s These items should be serviced by your servicing dealer,
Generat Recemmendatiens
Regular maintenance will improve the performance and
extend the life of the pressure washer. See any Sears or
other qualified service dealer for service.
The pressure washer warranty does not cover items that
have been subjected to operator abuse or negligence. To
receive full value from the warrant}', the operator must
maintain pressure washer as instructed in this manual
including proper storage as detailed in Storage.
Some adjustments will need to be made periodically to
properly maintain your pressure washer.
All service and adjustments should be made at bast once
each season. Follow the requirements in the Maintenance
Schedulechart above.
NOTICE Once a year you should clean or replacethe spark
plug and replacethe air filter, A new spark plug and clean air
filter assure proper fuel-air mixture and help your engine run
better and last longer,
Pump Oil
DONOT attempt any oil maintenanceon this pump. The
pump is pre-lubricated and sealed from the factory, requiring
no additional maintenance for the life of the pump.
Emissions Centre_
Maintenance, replacement, or repair of the emissiens
eentrel devices and systems may be performed by any non-
read engine repair establishment or individual. However,
to obtain "no charge" emissions control service, the work
must be performed by a factory authorized dealer. Seethe
Emissions [@rrantv.
Befere Each Use
1. Check engine oil level.
2. Clean debris.
3, Check water inlet screen for damage.
4. Check high pressure hose for leaks.
5. Check gun and nozzle extension for leaks.
6. Purge pump of air and contaminants.
PRESSURE WASHERJVJAJNTENANCE
Clean Debris
Daily or before use, clean accumulated debris from pressure
washer. Keeplinkage, spring and controls dean. Keep area
around and behind muffler free from any combustible debris.
inspect cooling air slots and openings on the pressure
washer. These openings must be kept clean and
unobstructed.
Pressure washer parts should be kept clean to reduce the
risk of overheating and ignition of accumulated debris.
* Use a damp cloth to wipe exterior surfaces clean.
NOTICE improper treatment of pressure washer could
damage it and shorten its life.
DONOTinsertanyobjectsthroughcoolingslots.
* Use a soft bristle brush to loosen caked on dirt, oil, etc.
, Use a vacuum cleanerto pick up loose dirt and debris.
Checkand Clean Inlet Screen
Examinegarden hose inlet screen. Cleanif it is clogged or
replace if it is torn.
17