Using The Timer; Using The Child Safety Lock - Fagor 670040240 Manual Del Usuario

Using the Timer:

The timer allows you to program a determined cooking time, after which the cooktop
will turn itself off.
1. To use the timer, follow steps 1 to 4 of the "How to Use Your Fagor Induction
Cooktop" section. Once you have set the desired cooking level, tap the TIMER
button once. The display panel will show a blinking "0:00".
2. Tap the PLUS button to increase the programmed time minute by minute.
Or, tap and keep your fi nger pressed on the PLUS button to increase the time in
10 minute increments. If you want to decrease the time, tap the MINUS button.
If you are cooking on power levels 1, 2, 3 or 4, the maximum time you can program
the timer for is 6 hours.
If you are cooking on power levels 5 or 6, the maximum time you can program the
timer for is 4 hours.
Once you have selected the desired cooking time, the displayed time will stop
blinking after a few seconds and the timer will start the count-down.
3. To change the programmed time while it's counting down, tap the TIMER button
again once, and use the PLUS/MINUS buttons to change the time. To stop the timer,
tap the TIMER button twice and the light beside the TIMER button will turn off.

Using the Child Safety Lock:

To prevent children from turning the cooktop on accidentally or changing the cooking
settings, tap the CHILD LOCK button. The light beside the button will turn on and the
cooktop will not respond to power or timer changes. You can tap the child lock button
either when the cooktop is operating, or when it's turned off.
When the CHILD LOCK is on, the only button that will function is the ON/OFF button.
To turn the child lock off, it is not suffi cient to just tap once on the CHILD LOCK button.
You have to press and hold the button for a couple of seconds until you hear a beep
and the light turns off.
PIC Manual Revision.indd 10 PIC Manual Revision.indd 10
10
5/16/09 6:22 PM 5/16/09 6:22 PM