Cleaning And Maintenance; Technical Specifications - EuroLite MD-3010 Manual Del Usuario

Before taking into operation for the first time, the installation has to be approved by an expert!

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
Maintenance and service operations are only to be carried out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Max. load WLL (4-fold):
Max. load BGV C1 (8-fold):
Max. load BGV C1 (10-fold):
Max. load BGV C1 (12-fold):
Max. diameter of mirror ball:
Rotation-speed:
Dimensions (LxWxH):
Poids:
Please note: Every information is subject to change without prior notice. 04.05.2005 ©
DANGER TO LIFE!
230 V AC, 50 Hz ~
7 W
120 kg
60 kg
50 kg
40 kg
100 cm (EUROLITE)
approx. 1 RPM
280 x 240 x 110 mm
5 kg
14/26 00026092.DOC, Version 2.0