Publicidad
INSTALLING HANGER BRACKETS
For better clearance, lower the tractor's suspension arms
using the attachment lift lever.
STEP 26: (SEE FIGURE 25 or 26)
On Tractors With Foot Rest Brackets
•
Remove the bolt and nut that fasten the L.H. and R.H.
foot rest brackets to the frame.
•
Attach the L.H. Hanger Bracket (marked "L") to the
inside of the tractor frame using two 3/8" x 1" carriage
bolts (G) and 3/8" flanged nuts (X). Bolt heads go on
inside of tractor frame. Repeat for the R.H. side.
BOLT REMOVED
FROM THIS HOLE
3/8" x 1"
L.H. HANGER
CARRIAGE
BRACKET
BOLT (K)
FIGURE 25
On Tractors Without Foot Rest Brackets
•
Find the empty hole beneath the foot rest. Attach the
L.H. Hanger Bracket (marked "L") to the inside of the
frame using a 3/8" x 1" carriage bolt (G) and a 3/8"
flanged nut (X). Bolt head goes on inside of tractor
frame. Repeat for the R.H. side.
3/8" x 1"
L.H. HANGER
CARRIAGE
BRACKET
BOLT (G)
FIGURE 26
3/8" FLANGED
NUT (X)
SUSPENSION ARM
LEFT SIDE VIEW
3/8" FLANGED
NUT (X)
SUSPENSION ARM
LEFT SIDE VIEW
INSTALLING SHOULDER BOLTS
STEP 27: (SEE FIGURE 27)
•
Remove the bolt, washer and nut which fasten the
sway bar bracket to the L.H. side of the tractor frame.
Replace with a shoulder bolt (L) and a 3/8" flanged
nut (X). Bolt goes on inside of frame.
SHOULDER BOLT (L)
BOLT REMOVED
FROM THIS HOLE
FIGURE 27
STEP 28: (SEE FIGURE 28)
•
Assemble a shoulder bolt (L) and 3/8" flanged nut (X)
to the R.H. side of the tractor frame, using the first
empty hole to the rear of the R.H. hanger bracket. Bolt
goes on inside of frame.
3/8"
FLANGED
NUT (X)
SHOULDER BOLT (L)
R.H. HANGER BRACKET
FIGURE 28
15
3/8"
FLANGED
NUT (X)
SWAY BAR
BRACKET
LEFT SIDE VIEW
RIGHT SIDE VIEW
Publicidad
