Using The Steam Cleaner; Filling The Water Tank - EASYHOME MD 16941 Manual Del Usuario

Using the steam cleaner

PLEASE NOTE!
Risk of damage.
Damage may be caused to surfaces and to the cleaner foot if
worn cleaning cloths are used.
− Replace worn microfi ber cloths immediately. Contact
customer service for replacement cloths.

Filling the water tank

PLEASE NOTE!
Risk of damage.
The appliance may be damaged by additives in the water.
− Do not add cleaning agents to the water tank.
− Use distilled water if possible in order to prevent the build-
up of limescale.
Make sure that the appliance is switched off and unplugged.
− Pull on the cap fi tting on the water tank
the water tank
16–17 oz) of tap water or distilled water, using the measuring cup
supplied with the appliance. Do not overfi ll the water tank.
You can also take the water tank off the product in order to fi ll it
(see Fig. E).
− Fit the cap back on the water tank opening.

Using the steam cleaner

The steam cleaner is designed to release and remove stubborn dirt
from smooth, heat-resistant surfaces in the household without the use
of chemical solvents. The steam cleaner can also be used to freshen up
curtains, clothing and upholstery.
− Prepare the steam cleaner and accessories for use, as instructed
above.
16
. Fill the water tank with 470–500 ml (approx.
10
in order to open
11