EASYHOME MD 16941 Manual Del Usuario página 18

CAUTION!
Risk of injury/damage.
There is a risk of scalding and a risk of damage to
surrounding objects from the steam.
− Never leave the steam cleaner unattended during
operation.
− Allow the appliance to cool down before
changing the cleaning cloth.
− Do not hold the cleaner foot at an angle as hot
water may run out.
− Do not touch the bottom of the cleaner foot
during operation.
PLEASE NOTE!
Risk of damage.
Surfaces can get damaged.
− Do not use the fl oor cleaner foot without the cleaning cloth
or with the carpet glider.
− Do not use on untreated wooden fl oors. When cleaning
heat-sensitive fl oors, e.g. linoleum or similar surfaces, do
not allow the steam to penetrate one part of the fl oor for
too long.
− If in doubt, consult a fl ooring specialist to check whether
your fl oor can be steam-cleaned.
1. Connect the appliance to an easily accessible, properly installed
socket with a power supply of 120 V~60 Hz.
2. Turn the steam jet control
Always set the steam jet control to the maximum setting in the
heating-up phase in order to be able to produce enough steam.
3. Press the on/off switch
clockwise to the maximum setting.
5
.
2
Using the steam cleaner
17