Care And Maintenance - TaoTronics TT-BA07 Guía De Usuario

Pair in RX mode:
Press and hold the Power Button of the adapter for 5
seconds (LED indicator flashes blue slowly). It will
start pairing 5 seconds after being powered on (LED
indicator flashes red and blue alternatively).
1. Activate the Bluetooth
®
and search for the nearby Bluetooth
• For iOS: Settings > Bluetooth
• For Android: Settings > Wireless & Networks >
Bluetooth
® : On > Scan for devices
2. Find "TaoTronics TT-BA07" in the search results and
tap on it to connect. Once connected, the LED
indicator will turn solid blue.
Note:
• The adapter enters pairing mode automatically
when powered on for the first time.
• The original pairing memory will be cleared after
a mode switch. It will automatically start pairing
each time it's powered on.
• If a PIN code is required for pairing, try 0000
(four zeroes), 8888 (four eights), 1111 (four ones),
or 1234.
• The adapter can remember previously paired
devices and will attempt to pair with devices
automatically, without going into pairing mode.
Pair with two devices at the same time
In TX mode:
In TX mode, the adapter is able to pair with two Bluetooth®
stereo earphones/speakers at the same time.
1. Follow the previous instructions in the "Pairing" section
to pair the TT-BA07 with your first device.
2. Turn off the Bluetooth® function on your first device,
tap the Power Button twice to pair and connect to your
second device.
05
function on your phone
devices:
®
> On
®
3. Turn on the Bluetooth® function on your first device.
In approximately 30 seconds, the first device will
automatically connect in.
Note:
• When you pair with two devices, both can play
music at the same time.
• The adapter will automatically re-pair when
powered on.
In RX mode:
In RX mode, the adapter is able to pair with two Bluetooth®
devices at the same time.
1. Follow previous instructions in the "Pairing" section to
pair the TT-BA07 with your first device. Disable the
Bluetooth® function on your first device. Tap the Power
Button twice to pair with the second device.
2. Turn on the Bluetooth® of the first device, now TT-BA07
adapter is successfully paired with both devices.
Note:
• Only one device can play music at any time. You
have to stop the music on one device to play on
the other.
• The adapter will automatically re-pair when
powered on.

Care and Maintenance

• Keep the adapter away from heat and humidity.
• Do not expose the adapter to direct sunlight or
extreme heat.
• Do not try to take the adapter apart. It may cause serious
damage.
• Do not drop or knock the adapter on hard surfaces as
it damages the interior circuit.
• Do not use chemicals or detergents to clean the product.
• Do not scrape the surface with sharp objects.
06