Start Up; Control Panel - DV Systems HTD 18 Manual De Uso Y Mantenimiento

1 Air Compressor
2 Aftercooler
3 Condensate Separator
4 Receiver
5 Automatic Drain
Ceramic Prefilter 10μ
6
7 Dust Filter 5μ
8 Dryer
9
Solenoid drain valve
10 Coalescing Filter 1μ - 0.1 mg/m
Coalescing Filter 0.01μ – 0.01 mg/m
11
12 Activated carbon filter 0.003 mg/m
13 Water/Oil Separator
In order to optimise the use of the dryer, we suggest to place it in such a way that all the control
instruments of the machine will result easily visible.
Installing a ceramic pre-filter on the air inlet of the dryer, this will be better protected from eventual solid
particles, as it prevents the accumulation of oily materials on the heath exchangers.

3.1 CONTROL PANEL

The machines belonging to this series are provided with an electronic system for parameters modification, so eventual
reset operations can be performed by means of the digital panel located on the front of the dryer.
The control panel illustrated in PIC.1 is composed of 5 keys (ON/OFF, TEST, SET, DOWN e UP) and a 3 digit display,
with three signalling LEDs indicated by DP1 DP2 DP3.
Under normal operating conditions the display controller shows the temperature read by the probe without decimal
degrees. When an alarm condition occurs, the display shows the relevant alarm code.
Cod. 710.0134.20.00 Rev06B – 04.2016
3
3
3

3. START UP

Pic.2 control panel
Pic 1
ENGLISH
Water
Water
5