Performing A Blood Glucose Test - Abbott FreeStyle Lite Manual Del Usuario

Performing a Blood Glucose Test

11
1.
Remove test strip from vial.
2.
Insert test strip to turn meter on.
Note: The meter turns off after 2 minutes of inactivity.
Remove and reinsert the unused test strip to restart
the meter.
If the meter does not turn on, go to Troubleshooting section.
3.
Confirm System Check Screen.
•
This display appears when you turn on the meter. Do not use the meter if
the display check screen does not exactly match the example. Contact
Customer Care.
•
See The FreeStyle Lite Meter and How It Works section for more information.
•
If the system check screen does not appear, go to Troubleshooting section.
4.
Obtain a blood drop.
When the and appears, use the lancing device to obtain a blood drop.
(See FreeStyle lancing device insert for instructions.)
The test strip requires only a 0.3 microliter of blood for accurate results.
www.AbbottDiabetesCare.com
Top
Printed side up
Sample areas