Setting The Time Zone - Hama RC100 Instrucciones De Uso

• Press the MODE button (4) again.
The minute digits flash. You can set the minutes with the + and – buttons (3).
• Press the MODE button (4) again.
The ALARM time is set and the
Setting Alarm 2:
• In the display for ALARM 2: press and hold the MODE button (4) for approx. 3 seconds.
The hour digits flash. You can set the hours with the + and – buttons (3).
• Press the MODE button (4) again.
The minute digits flash. You can set the minutes with the + and – buttons (3).
• Press the MODE button (4) again.
The ALARM time is set and the
Activating Alarm 1 / Alarm 2:
• Press the ALARM button (6) to activate Alarm 1.
The symbol is displayed.
1
• Press the ALARM button (6) again to activate Alarm 2.
The symbol is displayed.
2
• Press the ALARM button (6) again to activate both alarm times.
The and symbols are displayed.
1 2
• Press the ALARM button (6) again to deactivate all alarms.
Neither of the and
1
Alarm trigger and snooze function
• When ALARM 1 / ALARM 2 goes off, the corresponding alarm symbol
• Press the ALARM button (6) to switch off the alarm.
• If you press the SNOOZE/LIGHT (1) button, the alarm stops and the backlighting comes on for 5 seconds.
The display for repeating the alarm (Z
• If the alarm is not switched off, it stops automatically after 4 minutes.

5.7 Setting the time zone:

• Press and hold the + button (2) for 3 seconds. The
• In the time zone and temperature display, hold down the MODE (4) button for 3 seconds. You can set the
time zone (hours only) by pressing the + or – (3) button.
• Press the MODE button (4) again to confirm the time zone setting.
• Press and hold the + button (3) for 3 seconds to switch the display between local and abroad time.
symbol is displayed.
1
symbol is displayed.
2
symbols is displayed.
2
) flashes. After 4 minutes, the alarm goes off again.
z
1
F
icon appears.
/ flashes.
2
5