Interfacing; General; Balanced Input With Phantom Power; Balanced Input With No Phantom Power - AKG C747 V11 Modo De Empleo

The C 747 V11 is a condenser microphone and therefore needs a power supply.
The microphone provides a balanced output on a 3-pin male XLR connector:
Pin 1: ground
Pin 2: hot
Pin 3: return
You can connect the microphone to balanced microphone inputs with or without
phantom power. AKG phantom power supplies allow you to connect the micro-
phone to unbalanced inputs as well.
C 747 V11
C 747 V11 B 18
1. Use an XLR cable to connect the microphone to a balanced XLR input with
phantom power.
2. Switch the phantom power on. (Refer to the instruction manual of the unit to
which you connected your C 747 V11.)
• If your mixer provides no phantom power, connect an optional AKG B 18 phan-
tom power supply between the microphone and the mixer.
C 747 V11 B 18
You may connect the AKG B 18 phantom power supply to an unbalanced input as
well.
• Refer to the instruction manual of the B 18 phantom power supply.
3.2
3.3
C 747 V11

3 Interfacing

3
Refer to sections
3.2 and 3.3 below.
3.2 Balanced Input
with Phantom Power
Fig. 1: Connecting to
a balanced input.
Refer to fig. 1.
3.3 Balanced Input
with No Phantom Power
Refer to fig. 1 above.

3.4 Unbalanced Input

Fig. 2: Connecting to
an unbalanced input.
Refer to fig. 2 above.

.1 General

15