Playing Audio Files On A Usb Drive; Playing Audio Files On A Network Connected Device - Denon Professional DN-700CB Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Playing Audio Files on a USB Drive

To play audio files on a USB drive:
1. If the unit is off, press the Power button to power it on.
2. Connect your USB device (mass storage class) to the Front USB Port.
3. Select USB as the audio source (as described in
4. Select an audio file:
When a USB flash drive is first connected, files on the root directory will be shown on the Display.
Press and hold the Folder button to open to the first folder. All files within that folder will appear
first. All other playable content on the flash drive will appear after. To access another folder, press
and hold the Folder button again.
To scroll through audio files, turn the Jog Dial on the unit.
Press the Jog Dial while an audio file is highlighted to select this track. Alternatively, press one of
the Number buttons (0–9) to enter the desired track number. If the track number is two digits,
press the buttons in succession (e.g. 1 then 2 to enter 12).
5. Press the Play/Pause (
To remove a USB device, gently remove it from the Front USB Port when it is not playing. Removing a
USB device while it is playing can damage it.

Playing Audio Files on a Network Connected Device

To play audio files on a device connected to the network:
1. If the unit is off, press the Power button to power it on.
2. Use a standard ethernet cable to connect your device to the Ethernet Port. Alternatively, you can use
an ethernet cable to connect a router to the Ethernet Port and then connect your device to the router.
3. Select NET as the audio source (as described in
4. Use the Jog Dial to scroll through the NET Server List on the Display. Then select the host server by
pressing the Jog Dial.
5. To find an audio file, first turn the Jog Dial to scroll through your device's directories, folders, and
audio files (shown on the Display). Press the Jog Dial while a directory or folder is highlighted to open
it and scroll through its contents. To go back, press the Stop button.
6. Once you have highlighted the audio file you would like to select, press the Jog Dial.
7. Press the Play/Pause (
Selecting the Audio
) button on the unit or remote to initiate playback of the selected track.
Selecting the Audio
) button on the unit or remote to initiate playback of the selected track.
Source).
Source).
13

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido