Folding / Unfolding Pedal Exerciser; Mounting Calorie Meter; Working Calorie Meter - Vermeiren Kim Manual De Instrucciones

To transport the pedal exerciser in the car, or for
storage of the pedal exerciser, you can fold the
pedal exerciser.
7.1. Unfolding pedal exerciser
 Fold the legs (2)
outwards until the locking pin
(1)
clicks automatically in the hole.
 Check that the legs
cannot move.
7.2. Folding pedal exerciser
 Press the locking pin
 Fold the legs inwards

8. Mounting calorie meter

3
4

Place the star button (3) through the attachment
plate of the calorie meter (4).

Mount the star button and calorie meter on the
pedal exerciser.

Attach the clasp (5) of the calorie meter to the
frame tube (6).
(2)
are firmly fixated and
(1)
.
(2)
.
5
6
9. Working of the calorie meter

When pedalling with the pedal exerciser, the
STOP in the bottom right corner disappears, and
all the functions start calculating.

If you stop pedalling, the STOP will reappear in
the bottom right corner after 4 seconds, all
functions stop calculating.

The calorie meter displays 4 different functions.
CNT: Gives the amount of revolutions of the
pedals (counts how many times the magnet on
the pedal passes the calorie meter) from this
exercise session.
TOT.CNT: Gives the total amount of revolutions
of the pedals from different exercise sessions.
CAL: Gives the total amount of calories
consumed during the exercise session.
TIME: Gives the total time of the exercise
session.
Press the red selection button to go to the next
function (TOT.CNT, CAL, TIME). The display
always shows the CNT function.
Press the red selection button for 4 seconds to
reset the functions (CNT, CAL, TIME). The
TOT.CNT is not reset. When you have reset the
data, a next exercise session shall be started.

SCAN: Press the red selection button to go to
SCAN. When the arrow points to SCAN, you have
selected the mode SCAN. Now the display
automatically goes through all the functions
(TIME, TOT.CNT, CAL), and shows them
consecutively.

When you remove the battery, all the data (TIME,
TOT.CNT, CNT, CAL) shall be lost. If you see an
improper display, please replace the battery to
have a good result. Use a 1,5 V battery as power
supply.
3
Kim
2019-03

Press the red
selection button to activate
the calorie meter, or start
pedalling with your pedal
exerciser. When the magnet
passes by the calorie meter,
the calorie meter activates
automatically.

The calorie meter
display turns off
automatically after 4 to 5
minutes.
EN
NL