Accessories; Location Identification Plate; Explanation Of Symbols; Use - Vermeiren V200 XL Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 124
1.4

Accessories

The following accessories are available for the V200 XL:
Anterior pelvic belt (B20) for mounting on the tubes of the back (see according
manual)
Anti-tipping device (B78) for mounting on the bottom frame (see according manual).
1.5

Location identification plate

1.6

Explanation of symbols

Maximum mass
Indoor and outdoor use
Down slope
Up slope
CE conformity
Not crash-tested
2

Use

This chapter describes the everyday use. These instructions are for the user and the
specialist dealer.
The wheelchair is delivered fully assembled by your specialist dealer. The instructions
intended for the specialist dealer on how to set up the wheelchair are given in § 3.
2.1

Carrying the wheelchair

The best way to carry the wheelchair is to make use of the wheels and roll the wheelchair.
If this is not possible (e.g. when the rear wheels are taken off for transportation in a car),
firmly grasp the frame on the front and the grips. Do not use the foot or arm rests or the
wheels to grasp the wheelchair.
1 = Logo Vermeiren
2 = Not crash-tested
3 = Identification plate
4 = Name Vermeiren
ƒ‰‡
V200 XL
2012-02

Publicidad

Tabla de contenido
loading

Tabla de contenido