Service And Maintenance - Ega Master 57074 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

It is strongly recommended that a regular service programme for all air powered tooling be
adopted and managed, as reqularly maintained air tools ensure a long life cycle, optimal power and
reduced operating expenses. Repairs of air tools should be carried out by trained specialists and
authorized service dealers. For this reason, we strictly advise against attempting to repair without
this support. Pour a liberal amount of air tool oil in air inlet. If tool remains jammed, it should be
serviced by an authorized service Center. If operation cannot be restored, tool should be checked
by the manufacturer.
The tools are warranted to be free from defects in material and workmanship for one year from
the date of purchase.
The warranty shall not apply to the following cases:
1) Normally wearable parts such as bearings, rotor blades, etc.
2) Consumables such as sanding pads, filters, etc.
3) Misuse, neglect in maintaining tool / machine or tool / machine modification.
4) Lack of lubrication or evidence of rust, dirt or corrosion.
5) Tools / Machines being used after they are badly worn such as using ratchet with worn yoke.
6) The users do not comply with our manual.
Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts
is not covered by Warranty.
12

SERVICE AND MAINTENANCE

LIMITED WARRANTY

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

570755707657077

Tabla de contenido