Danger Zones; Maintenance Instructions - Ega Master Aqua Master 79901 Manual De Instrucciones

PRIOR TO UNDERWATER WORK
· Check the machine is not leaking
· Check the functioning of all parts
· Spraying of all moving parts with spray OKS 8601 (or similar)
· Insert the consumable with grease.
AFTER UNDERWATER WORK
· Clean the machine thoroughly
· Dry the machine by blowing it with compressed air
· Spraying of all moving parts with spray OKS 8601 (or similar)
For additional information look at the specific operation and maintenance instruction.
For a long life we recommend regular (3-monthly) general overhaul by the manufacturer.
Spray OKS 8601

DANGER ZONES

Operational
condition
--------------
Life phase
Transport
Start-up
Operación
Maintenance
Our pneumatic motors are designed for an operation pressure of 4 -6 bar (65-90 PSI).
Service life and performance of the machines are decisively determined by:
a) The air purity
Blow the air hose clear before connecting it to the machine. Install dirt and water separator upstream of the
machine, if it is not possible to prevent the formation of rust and water condensation in the air distribution lines.
OPERATING INSTRUCTION FOR UNDERWATER TOOLS
Normal function
Transport of the
machine in an
inoperable
condition
Use with
designated
grinding and
milling tools
La máquina solo
trabaja con una trabaja sin válvula
válvula de actuación
Machine moves Consumable not
the tool
Regular Breakdown of the
cleaning

MAINTENANCE INSTRUCTIONS

Malfunction Improper use
Transport the
Dropping the machine in an
machine
Use of tools,
which are not
Unknown rated for use at
20,000 rpm (free
Valve is blocked
La máquina
de actuación
properly fixed
machine
Expected use
Unknown
operable
condition
Unknown
speed)
in actuated Unknown
condition
Unknown Unknown
Unknown Unknown
13