Nevir NVR-4422 CSD Manual De Instrucciones página 22

1. Top Hinge Cover
2. Top Hinge
3. Door

Remove the plastic Top Hinge Cover (1)

Remove the retaining screws and the Top Hinge (2)

Lift the door off the Lower Hinge (4).

Remove the retaining screws and the Lower Hinge (4)

Remove the Hinge Pin and Foot from the Lower Hinge (4), turn the hinge over and refit
the Hinge Pin and Foot.

Remove the Foot (5) from the left hand side and refit on the right hand side. Now fit the
Lower Hinge (4) to the pre-drilled holes on the opposite side of the cabinet

Now fit the Lower Hinge (4) to the pre-drilled holes on the opposite side of the cabinet

Remove the Plastic Caps (6) from the top left hand side and refit on the right hand side.

Locate the Door (3) onto the Lower Hinge (4) and refit the Top Hinge.
 Ensure that the door closes and seals correctly – tighten all the screws.

Refit the Top Hinge Cover (1)
4. Lower Hinge Pin/Foot
5. Left Foot
6. Left Hand Hinge Holes/Plastic Caps
21
English