Volume Control; Audio Playback; Battery Level - Hama Style Instrucciones De Uso

• Other examples: Set an alarm for tomorrow at 7 am.
5.4.1. Redial
• Tap the Multifunction touch sensor (3) on the left earphone
twice to call the number of the last call.
• You will hear a short acoustic signal. Then say 'Redial'.

5.4.2. Volume control

• The volume is controlled using the Voice Assistant function.
• Tap the Multifunction touch sensor (3) on the left earphone
twice. An acoustic signal should sound. Then speak into your
earphones: 'Increase the volume by 50%' or 'Decrease the volume
by 30%' or 'Maximum volume'. Your voice assistant adjusts the
volume as requested.
• Alternatively, you can control the volume using your smartphone.

5.5. Audio playback

• Tap and hold the Multifunction touch sensor (3) on the right
earphone for about 2 seconds to go to the next track.
• Tap and hold the Multifunction touch sensor (3) on the left
earphone for about 2 seconds to go to the previous track.
• Tap the Multifunction touch sensor (3) on the right earphone
twice to start or stop audio playback.
5.6. Disconnecting the earphones
• Switch off the earphones by placing them back in the charging box.
• Disconnect the earphones via the Bluetooth
terminal device.

5.7. Battery level

Charging box
• If the battery level of the charging box is low (< 25%), the status
LED (2) flashes blue.
• Charge the charging box as described in 4. Getting started.
Earphones
• If the battery level of the earphones is low (< 25%), the status
LED (5) on the earphone with the low battery level flashes red
approximately every 5 seconds. In addition, a voice says, 'Battery low'.
8
Play music.
What's in the news?
settings on your
®