Getting Started; Switching To Digital Tv Screen Åıç; Functions During Digital Tv Screen Åı - Kenwood KTC-D500E Manual De Instrucciones

Getting Started

Lets view some digital broadcasts.
Switching to Digital
TV Screen
Press [V.SEL] on the monitor to switch to Digital
TV Broadcasting.
TV TV1
AUTO1
Mode :
TV TV1
AUTO1
⁄
• When you first switch to digital TV broadcasting, a
Welcome Menu appears and Auto Scan starts.
When Auto Scan ends normally, a Channel List
containing channels available at the current location is
created and the first channel is displayed.
• Auto Scan may have been performed already at the
dealer where the unit was installed.
• The display language can be changed (page 13).
A B C
Preset 3
2ch
F u l l AV- O U T: AV- I N
2ch
IN AF
Functions During Digital
TV Screen
Basic functions are available even when the TV
screen is displayed.
1
2 4
5
6
1 Picture Source Display Area
Displays the TV Status, Display Mode, and
AVOUT settings (page 13).
2 Channel Down Search Area
Searches downward and selects the
channel.
3 Channel Up Search Area
Searches upward and selects the channel.
4 Menu Control Area (Å group only)
Displays the Menu Control screen (page 11).
5 Information Display Control Area
Turns ON/OFF the display of information
in the Picture Source Display Area 1 and
Source Information Display Area 2.
6 Audio Source Information Display Area
⁄
• There are four ways to select the desired station.
- By searching for available station
- By selecting from EPG (Electronic Program Guide) (page
10)
- By selecting from the Channel List (page 12)
- By specifying a channel number (page 11)
• You can add the selected channel to the Channel List if it
is not already listed.
A B
3
5
English