ENGLISH
(Original instructions)
1
Switch trigger
2
Reversing switch lever
3
Bit
4
Sleeve
SPECIFICATION
Capacities
No load speed (min
Impacts per minute
Max. fastening torque
Dimensions (L x W x H)
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
General Power Tool Safety Warnings
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
4
Explanation of general view
5
Bit-piece
6
Hook
7
Fastening time
8
Screw size
Model
Machine screw
Standard bolt
High tensile bolt
–1
)
Net weight
Safety class
IMPACT DRIVER SAFETY WARNINGS
1.
Hold the power tool by insulated gripping sur-
faces, when performing an operation where the
fastener may contact hidden wiring or its own
ENE033-1
cord. Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
2.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
ENF002-2
high locations.
3.
Hold the tool firmly.
4.
Wear ear protectors.
5.
Do not touch the bit or the workpiece immedi-
ately after operation. They may be extremely hot
and could burn your skin.
6.
Keep hands away from rotating parts.
GEA010-2
7.
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
8.
Hold the power tool by insulated gripping sur-
faces, when performing an operation where the
cutting accessory may contact hidden wiring or
its own cord. Cutting accessory contacting a "live"
wire may make exposed metal parts of the power
tool "live" and could give the operator an electric
shock.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
9
Limit mark
10 Brush holder cap
11 Screwdriver
6952
4 mm – 10 mm
6 mm – 14 mm
6 mm – 10 mm
0 – 3,300
0 – 3,300
120 N•m
229 mm x 67mm x 180 mm
1.4 kg
/II
GEB136-1