Removing the camcorder
Before opening the marine pack, rinse it with fresh water and dry with a soft cloth.
When you open the marine pack, make sure you are dry. And take care that no water
drips from your wet suit.
1
Remove the grip.
2
For DCR-TRV6E/TRV8E/
TRV9E/TRV10E/TRV11E/
TRV20E/TRV890E/TRV900E
Unfasten 3 latches and open the
marine pack.
Disconnect the monitor cord from
the camera mounting shoe B.
3
Take the camcorder out of the
front shell.
Hold the camera mounting shoe by
the knobs and extract the
camcorder.
When you open the marine pack,
do not pull the monitor plug cord
by force.
4
Disconnect the remote plug and
the microphone plug.
5
For DCR-TRV6E/TRV8E/
TRV9E/TRV10E/TRV11E/
TRV20E/TRV890E/TRV900E
Disconnect the A/V connecting
cable of camera mounting shoe B
from the AUDIO/VIDEO jack.
18
-GB
For DCR-TRV7E
Disconnect the monitor plug from
the AUDIO/VIDEO jack.