Sony MPK-DVF3 Manual De Instrucciones página 6

Preparation (continued)
6
Attach the camera mounting shoe.
Use camera mounting shoe A.
Fasten the screw of shoe A to the
tripod screw hole of the camcorder
and tighten firmly.
Use camera mounting shoe B and
the screw plate.
1 Check the installation position
2 Attach the screw plate so that
3 Fasten the screw of the screw
4 Connect the A/V cable of the
6
-GB
For DCR-TRV7E
For DCR-TRV9E/TRV890E/TRV900E
(1, 2, or 3) of the screw plate for
your camcorder according to the
table on page 5.
the catch on the reverse side of
shoe B clicks into place.
plate to the tripod screw hole of
the camcorder and tighten
firmly.
shoe to the camcorder's
AUDIO/VIDEO jack.
Remove the screw
driver part.
Fasten
tightly.
Camera mounting
shoe B
Screw plate