Viewing Information In The Display - Sony TDM-NC1 Manual De Instrucciones

3
Press . / > until "AUTO JOIN?"
appears, then press ENTER.
4
Press . / > until "OFF" appears,
then press ENTER.
Tips
• If you set this, the unit memorizes the setting.
• If you want to unlock the blocked setting, select
"ON" in step 4.
Joining the PARTY MODE
You can invite guest units to join the PARTY
MODE.
The following procedures are for the guest units
only.
1
Press MENU.
2
Press . / > until "PARTY MODE?"
appears, then press ENTER.
3
Press . / > until "JOIN?" appears,
then press ENTER.
Leaving the PARTY MODE
You can exit guest units from the PARTY
MODE.
The following procedures are for the guest units
only.
1
Press MENU.
2
Press . / > until "PARTY MODE?"
appears, then press ENTER.
3
Press . / > until "LEAVE?"
appears, then press ENTER.
Viewing information in the
display
You can check the following information in the
display of the unit.
Note that this function is not available when
listening to web radio.
Checking the playing time and
remaining time
You can check the playing time and remaining
time of the current track.
Press TIME during playback.
Each time you press the button, the display
changes cyclically as follows:
Elapsed playing time t Remaining time
Checking the title and track
number
Press DISPLAY during playback or while
the track is selected in stop mode.
Each time you press the button, the display
changes cyclically as follows:
Track title t Album information on the track
t Artist information on the track t Genre
information on the track t Current track
number and total number of tracks within the
item
DISPLAY
TIME
GB
27