TaoTronics TT-BA08 Guía De Usuario página 6

If the TT-BA08 cannot pair with your Bluetooth device, please turn
the device off for 5 seconds and then switch it from RX mode to TX
mode. Turn the device off again and then after 5 seconds, switch it
back to RX mode.
LED Indicators
LED Indicator Status
Charging
Solid Red LED
LED Off Fully charged
Flashing Red
Pairing in TX / RX mode
and Blue
Low battery
Flashing Red
Successfully paired
Solid Blue LED
Powered on but not paired
Flashing Blue
with Bluetooth
devices
®
How to Use
Charging
1. Use a micro USB cable and connect the adapter to any active
USB port.
2. The LED indicator will turn red when charging. It will automatical-
ly turn off when the device is fully charged.
Note:
• We recommend charging the unit for at least 2 hours before using
it for the first time.
Pairing
Pair in TX mode:
1. Set the TT-BA08 to TX mode and connect it to your Non-
Bluetooth® audio transmitting device.
2. Place your Bluetooth
audio receiving device, like earphones /
®
speakers, within a 3 feet / 1 meter range and set it to pairing
mode.
3. Turn on the TT-BA08 and tap the power button twice to enter pairing
mode. After approximately 10 seconds, pairing will complete.
03/04